All Products

For E65S, E65S GbW, K30, K30 2.0, K30 TWIN, K30 TWIN 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders. Also compatible with Anfim Pratica and ...

One single bean hopper seal ring for E65S, E65S GbW, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 701119

Includes 1 can with 430 g.GRINDZ Grinder Cleaner to remove coffee residues inside the grinder casing and keep grounds fresh at all times. Use for r...

One silicone and metal flapper set for E65S and E65S GbW espresso grinders

Complete short bean hopper with 250 gram capacity for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Grinder top cover small parts set for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Pulling tool to take out the disc carrier, for burrs exchange or other maintenance, on the E65S and E65S GbW espresso grinders

Klüberpaste synthetic lubricating grease in a 50 gram tube for use with all coffee grinders. NSF H1 registered

Klüberpaste lubricating and assembly white paste in a 60 gram tube for use with all coffee grinders. NSF H1 registered Old article number: 309336

Ten bean hopper seal rings for E65S, E65S GbW, PEAK, K30 2.0, K30 ES/VARIO and K30 VARIO AIR espresso grinders Old article number: 309087

Spout pipe for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Load cell for E65S GbW and E80S GbW espresso grinders

4 piece set of rubber feet for X54 Allround Home, E65S, E65S GbW, E80S and E80S GbW coffee grinders

Circuit breaker with 110-127V for the E65S, E65S GbW, E80S, E80S GbW, K30, K30 2.0 and PEAK espresso grinders

Complete bean hopper with 1800 gram capacity for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Drip tray for the E65S GbW espresso grinder

Grinder top cover adapter for E65S and E65S GbW espresso grinders. To install, mount the pins with a hammer through the holes, the notched end will...

Complete bean hopper with 1200 gram capacity for E65S, E65S GbW, E80S and E80S GbW espresso grinders Old article number: 700610

Grind size transmission set for the E65S and E65S GbW espresso grinders

Power board unit with 100-127 V for E65S GbW and E80S GbW espresso grinders

Load cell cover for the E65S GbW espresso grinder

Spout angle adjustment guidance for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Pack of 10 grinder top cover seal ring adapters for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Display control unit for the E65S GbW espresso grinder

Capacitor with 60µF, 100-127V for the E65S and E65S GbW espresso grinders

Single grinder top cover seal ring adapter for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Interlock mechanic set for E65S and E65S GbW espresso grinders

Unlocking lever and sliding pins set for the grind size adjustment ring on the E65S, E65S GbW, E80S and E80S GbW espresso grinders

Power switch On/Off for E65S and E65S GbW espresso grinders

Interlock switch complete set for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Back panel with power board for 110-127V, E65S GbW espresso grinders

Complete set with display hard key, push buttons and springs for E65S GbW, E80S and E80S GbW espresso grinders Old article number: 701046

Circuit breaker with 100V for the E65S, E65S GbW, E80S, E80S GbW, K30 and PEAK espresso grinders

One plastic non-slip base plate pad for E65S, E65S GbW, E80S and E80S GbW espresso grinders

Disc Distance Detection (DDD) board for the E65S GbW espresso grinder

Fixed burr carrier for the E65S and E65S GbW espresso grinders