Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
Circuit breaker, 12.0 Amps, 115V 1~ also for EK43S, all Gua & Kenia, VTA single phase)
120mm Turkish burr set for the Mahlkonig VTA series grinders.
Sticker with grind adjustment scale and operating instructions for the VTA.
Sold out
Upper casing part, inside lacquered, with label, Lexan (COPPER) for the Mahlkonig VTA 6S. COPPER.
Grind adjustment ring with foam cover and handle for the Mahlkonig VTA series grinders.
Anti-static flapper for outlet spout for the Mahlkonig VTA series grinders. NSF certified.
Plastic cone for adjuster handle for the Mahlkonig VTA 6S series grinders.
VTA 6 S Slotted pan head screw, M6 x 16 coated.
Plastic distance bushing for the Mahlkonig VTA series grinders.
Spout conversion kit to NSF style with bag clamp for the Mahlkonig VTA 6s series.
VTA 6S Screw for replacable sweeps for burr sustainer.
Grind adjustment screw pressure piece for the Mahlkonig VTA series.
Sold out
Start capacitor (180uf) for the Mahlkonig VTA 6S 120VAC model. Also compatible with older EK43 configurations. NOTE: not compatible with newer EK43...
View full details
VTA 6 S - Slotted countersunk head screw M6 x 16 // DIN 963
Stainless steel hopper clamp knob for the Mahlkonig VTA series grinders
Tension spring anchor pin for the Mahlkonig VTA series grinders.
Mounting plate without electronics for the Mahlkonig VTA 6S 3-phase grinder. Includes the reset switch hole.
