Guatemala
KeGu Rubber Part for Foot or Bag Holder // K 3 - 509 // 4
This part also shows up on some K30 and K30 Twins for base foot. It also fits on the knocker arm of the EK43 and numerous other places on other gri...
View full details
KeGu and Old-Style EK43 Momentary Push Button Unit, service pack
Supersedes mechanical  type on/off switch #302365. Not interchangeable and you cannot upgrade from mechanical type unless you upgrade electronics....
View full details
Old-style Guatemala/Kenia and EK43 on/off switch
Old-style on/off switch for the Mahlkonig Guatemala, Kenia, and EK43 grinders. Switch K 32 S10 and K32 S11 and K32/10 Type ETA 16.
KeGu Transparent Replacement Hopper, Clear
Transparent Hopper for the Mahlkonig Guatemala and Kenia grinders. Please note that the clear and transparent hopper lid is sold separately, part 3...
View full details
EK43 Circuit breaker, 12.0 Amps, 115V 1 Amp
Circuit breaker, 12.0 Amps, 115V 1~ also for EK43S, all Gua & Kenia, VTA single phase)
KeGu Starting Capacitor 730 µF for K32/S10 and K32/10 Kenia
KeGu Starting Capacitor 730 µF for K32/S10 and K32/10 Kenia
KeGu Start Relay 4CR-2-707 Sensata
Your grinder may have an older version of this relay. Please see related information contained in the owners manual regarding correct wiring config...
View full details
KeGu/Guatemala Bag Holder Attachment Set
KeGu/Guatemala Bag Holder Attachment Set. This would also be considered the Spout K325 Small Parts kit.
Kenia/Guatemala Spout K32
Standard spout for the Mahlkonig Guatemala and Kenia series grinders. NOTE: This is only the spout.
KeGu Bag Holder Shaft, Service Pack for Kenia and Guatemala
Bag Holder Shaft, Service Pack - for Kenia and Guatemala Grinders
Guatemala Standard Factory Spout with Bag Holder
Standard Factory Spout with Bag Holder for the Mahlkonig Guatemala series.
