GRINDER PARTS
EK43 Contact strip (static strip)
This lives on the inside of your spout and is attached to the right rear spout screw. Upon installation, make sure that the strip is contacting the...
View full details
K30 Seal ring 70x50x2 (Hopper Gasket)
K30 Seal ring 70x50x2 (Hopper Gasket), also works for EK43 and E65S grinders.
Sold out
EK43 Seal Ring
This slightly thinner hopper gasket made from a different, softer material than the K30 series can also be used on all K30 series grinders. This wo...
View full details
EK43 Series Aluminum Prebreaker
Our 2nd generation pre-breaker, made of aluminum and designed for 2nd generation EK43/EK43S grinders. These grinders can be identified with round, ...
View full details
VTA 6 S / EK43 / KeGu Contactor 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
GSS Grinder, Plastic Knocker Ball for Spout Taper
For GSS Grinder only, plastic knocker ball for spout taper.
EK43 Ball bearing seat
Ball bearing seat for the Mahlkonig EK43 series grinders. This bearing seat is part of the face plate assembly. NOTE: The old part number is 300949.
