EK43 Spout screw M5x25
Filter Compatible Products
Filter By Model
K30 Grind Adjustment Key for K30 Series
This product can be used with other K30 Series grinders.
K30 Potentiometer Short, for the double-shot button.
VTA 6S Seal Ring 100/50 x 15 / donut, foam
Old-style on/off switch for the Mahlkonig Guatemala, Kenia, and EK43 grinders. Switch K 32 S10 and K32 S11 and K32/10 Type ETA 16.
Supersedes mechanical type on/off switch #302365. Not interchangeable and you cannot upgrade from mechanical type unless you upgrade electronics. C...View full details
K30 Tool for disc change in EK11b, K30, K30 Air and K30 Twin grinders.
Tool to remove the burr sustainer (rotating burr carrier). This tool is necessary to change out the cherry (on/off) switch.
PEAK Screw Set Cover Grind Adjustment ETL/NSF
VTA 6S Return Spring for Bag Clamping Arm
VTA 6S Bag Clamping Arm Assembly, VTA6S10 NSF and W401
Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
PEAK Spout Grinding Chamber
K30 Potentiometer Long, necessary for the single shot button.
Ball for grind adjustment handle for the Mahlkonig VTA 6S series grinders.
PEAK Processor Board, service pack
Grind adjustment cap K32 Black plastic ALSO 309696
K30 Adjusting Knob for Potentiometer
KeGu Clear Hinged Lid, complete #Lexan 161
For use with 220V Single Phase grinder.
PEAK Fine Adjustment Adapter ETL/NSF, service pack