Replacement shear plate for 1st generation EK43 grinder. Please note that this specific shear plate will only fit the steel prebreaker, which is me...
View full details
On/ off switch when you insert your portafilter. This can sometimes fail or become loose where it is mounted.
Replacement shear plate for EK43 and EK43S grinder. Please note that this specific shear plate will only fit the aluminum prebreaker, which is blac...
View full details
Grind chamber complete with threaded adjuster and brass ring. This product can be used with all K30 Series grinders.
This part also shows up on some K30 and K30 Twins for base foot. It also fits on the knocker arm of the EK43 and numerous other places on other gri...
View full details
This mechanical points type switch is what turns on the start capacitor, which gives the electrical boost to the motor when you first start the gri...
View full details
PEAK Grinding Disc Carrier Fixed, service pack
The perfect addition to your E65S / E80 grinder, giving you the ability to use the high performing grinder in tighter spaces or underneath a cabine...
View full details
Adjustment plate (faceplate) securing screw. 2 are required.
All K30 single variants. NOT FOR K30 TWIN. IMPORTANT NOTE: this board is compatible with older Peaks that have one single capacitor; this is also c...
View full details
This spring is the same for all four springs for Kenia and 710 models. This spring is also for the front two springs for Guatemala vibrating spout.
Spout EK11b covered. Spout that attaches to the motor. For ALL K30 variants. K30 Twin/ES/Vario/Air. (REPLACING #243557)
Fits into hole in shaker plate that secures the shaker rod to the plate. Acts as an insulator. If this wears out or is missing, it will be very noi...
View full details
Lives in the body of the grinder tower. Accessed from the bottom of the grinder. May be blue color or silver color and also works for the EK43 &...
View full details
