
K30 / PEAK Standard Hopper (3.31 lbs.), includes lid and hopper slider
Standard full size 3lb. hopper fits K30ES/ K30 Vario/ K30 Air/ EK43 and EKK43 model grinders. Built in hopper slider. Due to the width of this hopp...
View full detailsStandard full size 3lb. hopper fits K30ES/ K30 Vario/ K30 Air/ EK43 and EKK43 model grinders. Built in hopper slider. Due to the width of this hopp...
View full detailsK30 Seal ring 70x50x2 (Hopper Gasket), also works for EK43 and E65S grinders.
This would be an optional smaller hopper that would fit K30ES/ K30 Vario/ K30 Air/ EK43 and EKK43 model grinders. Hopper slider built in. Note that...
View full detailsThis is a small parts set for the EK43 & EK43S knocker spout. This includes 4 spout screws, 4 springs and 4 bushings for a complete set.
Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
These bushings are used in collaboration with the screws and springs for the grind chute/spout on the EK43 series grinders. These bushings are sold...
View full detailsRotary shaft distance bushing for the Mahlkonig EK43 series grinders. St. 1.4305, 30/18H7 x 18mm.
Black grind adjustment scale sticker for the Mahlkonig EK43 series. Number scale runs from 0 to 16.
Grind adjustment spindle with fine thread pitch for the Mahlkonig EK43 series grinders. This is part of the face plate assembly.
Pressure ring for the Mahlkonig EK43 series grinders. This is part of the face plate assembly.
Ball bearing seat for the Mahlkonig EK43 series grinders. This bearing seat is part of the face plate assembly. NOTE: The old part number is 300949.
Motor body bolt (DIN 976) for the Mahlkonig EK43 series grinders. NOTE: this consists of one bolt, one washer, and one acorn nut. This is not a s...
View full detailsCompression spacer (30 x 41 x 0,5) for the Mahlkonig EK43 series grinders.
Power cord (3-wire, 14 AWG, 300VAC) with NEMA 5-15 plug for the Mahlkonig EK43 and Guatemala series grinders.
Power cord spare parts set for the Mahlkonig EK43 series grinders.
Bearing plate in for the Mahlkonig EK43 series grinders. NOTE: Currently only available in copper and stainless steel colors.
Cover, polished for bearing shield for older Mahlkonig EK43 series grinders.
Copyright 2021 of Mahlkonig USA. Powered by Shopify