EK Series Grinder Standard Replacement Burrs for coffee and spices. Compatible with both EK43 and EP43 grinder configurations.
Filter Compatible Products
Filter By Model
K30 Seal ring 70x50x2 (Hopper Gasket), also works for EK43 and E65S grinders.
EK43 Burr Alignment Tool
For threaded adjuster all K30 variants and Peak.
EK43 Adjustment Cap complete
Tension spring for the bag holder arm. (Old #301982)
EK43 Spout Gasket
Adjustment plate (faceplate) securing screw. 2 are required.
EK43 Starting capacitor 550 µF / 150 V UL
This is a small parts set for the EK43 & EK43S knocker spout. This includes 4 spout screws, 4 springs and 4 bushings for a complete set.
This spring is the same for all four springs for Kenia and 710 models. This spring is also for the front two springs for Guatemala vibrating spout.
Complete Spout and Bag Holder Assembly.
EK43 Spout screw M5x25
Old-style on/off switch for the Mahlkonig Guatemala, Kenia, and EK43 grinders. Switch K 32 S10 and K32 S11 and K32/10 Type ETA 16.
Clear plastic grounds residue tray for Mahlkonig EK43 series grinders.
Supersedes mechanical type on/off switch #302365. Not interchangeable and you cannot upgrade from mechanical type unless you upgrade electronics. C...View full details