Replacement burrs for the VTA6S 3 Phase. If you wish to purchase replacement burrs for the VTA6S single phase, please click here.
Filter Compatible Products
Filter By Model
VTA6 S 3 Phase
With 120mm burr set and increased motor size, the Mahlkonig VTA6 S Grinder is built for heavy duty grinding for large volumes and ultimate consistency.
- Top performance for high workloads
- Cooling through integrated motor ventilation
- Wide grinding range from turkish fine up to filter coffee grinding
- Individual grinding discs for turkish fine or espresso grinding sold separately
- Bag holder combines with lever switch: clamping and vibrating sheet
VTA 6S Seal Ring 100/50 x 15 / donut, foam
Tool to remove the burr sustainer (rotating burr carrier). This tool is necessary to change out the cherry (on/off) switch.
Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
Lives in the bag holder assembly.
VTA 6S Foam around selector handle
VTA 6S Bag Holder Sealing U-Shaped, foam
Circuit breaker, 12.0 Amps, 115V 1~ also for EK43S, all Gua & Kenia, VTA single phase)
Spout pinches up to this to hold your bag to the spout.
VTA 6S Pan-Head Screw M4 x 16 // DIN 85 (Old # 301414)
Wood type for most VTA6S grinders. Costco (HMVC) versions uses brass type.
Spout and sliding plate assembly. Comes with Cherry Switch (on/off switch) (Old# 304043)
VTA 6S Bag Holder Switch Cover, small L-shaped notch, foam
Sticker with grind adjustment scale and operating instructions for the VTA.
120mm Turkish burr set for the Mahlkonig VTA series grinders.
VTA 6S Polished Chrome Lid, for extension hopper
VTA 6S washer for Shaker Rod
VTA 6S Spout Cover
Grind adjustment ring with foam cover and handle for the Mahlkonig VTA series grinders.
VTA 6S Sweep Angle Plate
VTA 6S Hopper Screw M3 x 8 // DIN 964
VTA 6S Bag Vibrator Plate