Replacement shear plate for 1st generation EK43 grinder. Please note that this specific shear plate will only fit the steel prebreaker, which is me...
View full details
This is a small parts set for the EK43 & EK43S knocker spout. This includes 4 spout screws, 4 springs and 4 bushings for a complete set.
Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
These bushings are used in collaboration with the screws and springs for the grind chute/spout on the EK43 series grinders. These bushings are sold...
View full details
Twenty-position adjustment dial sticker for the Mahlkonig EK43 series grinders.
Rotary shaft distance bushing for the Mahlkonig EK43 series grinders. St. 1.4305, 30/18H7 x 18mm.
Grind adjustment face plate for the Mahlkonig EK43 series grinders in black color. (old part number 306156).
Sold out
Black grind adjustment scale sticker for the Mahlkonig EK43 series. Number scale runs from 0 to 16.
Black triangle-shaped Mahlkonig sticker. Found on the EK43s series in matte white (replacing #309495)
Grind adjustment spindle with fine thread pitch for the Mahlkonig EK43 series grinders. This is part of the face plate assembly.
Pressure ring for the Mahlkonig EK43 series grinders. This is part of the face plate assembly.
Ball bearing seat for the Mahlkonig EK43 series grinders. This bearing seat is part of the face plate assembly. NOTE: The old part number is 300949.
Grind chamber housing in aluminum alloy for the Mahlkonig EK43 series grinders. Currently only available in copper and matte white (6/2020). Please...
View full details
Sold out
Motor body bolt (DIN 976) for the Mahlkonig EK43 series grinders. NOTE: this consists of one bolt, one washer, and one acorn nut. This is not a s...
View full details
Shim ring 25x35x0,5 DIN988B (Seeger) for the Mahlkonig EK43 series grinders.
Compression spacer (30 x 41 x 0,5) for the Mahlkonig EK43 series grinders.
Spout lever small parts set for the Mahlkonig EK43 series grinders.
Power cord (3-wire, 14 AWG, 300VAC) with NEMA 5-15 plug for the Mahlkonig EK43 and Guatemala series grinders.
