EK Series Grinder Standard Replacement Burrs for coffee and spices. Compatible with both EK43 and EP43 grinder configurations.
Filter Compatible Products
Filter By Model
K30 Seal ring 70x50x2 (Hopper Gasket), also works for EK43 and E65S grinders.
For threaded adjuster all K30 variants and Peak.
EK43 Adjustment Cap complete
Tension spring for the bag holder arm. (Old #301982)
EK43 Spout Gasket
This is a small parts set for the EK43 & EK43S knocker spout. This includes 4 spout screws, 4 springs and 4 bushings for a complete set.
Adjustment plate (faceplate) securing screw. 2 are required.
EK43 Starting capacitor 550 µF / 150 V UL
This spring is the same for all four springs for Kenia and 710 models. This spring is also for the front two springs for Guatemala vibrating spout.
Complete Spout and Bag Holder Assembly.
EK43 Spout screw M5x25
Clear plastic grounds residue tray for Mahlkonig EK43 series grinders.
Supersedes mechanical type on/off switch #302365. Not interchangeable and you cannot upgrade from mechanical type unless you upgrade electronics. C...View full details
EK Series Grinder Turkish Replacement Burrs (fine)
Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
EK43 Rubber Gasket for EK43 wandering dial
The EK43 series grinder shares the same hopper as the K30 espresso grinder.This adapter is needed to adopt to the EK43 grinders.
Black grind adjustment scale sticker for the Mahlkonig EK43 series. Number scale runs from 0 to 16.
Circuit breaker, 12.0 Amps, 115V 1~ also for EK43S, all Gua & Kenia, VTA single phase)
EK43 Quick lock for bag holder shaft. Old part number was 301190.
Fits all three positions.
Grind adjustment face plate for the Mahlkonig EK43 series grinders in black color. (old part number 306156).
Rotary shaft distance bushing for the Mahlkonig EK43 series grinders. St. 1.4305, 30/18H7 x 18mm.
Spout lever small parts set for the Mahlkonig EK43 series grinders.
EK43 Felt ring for grinder housing
Static strip with spout seal gasket for the Mahlkonig EK43 series grinders.
EK43 Nut M 4 coated // DIN 1587
Grind adjustment spindle with fine thread pitch for the Mahlkonig EK43 series grinders. This is part of the face plate assembly.
Pressure ring for the Mahlkonig EK43 series grinders. This is part of the face plate assembly.
Ball bearing seat for the Mahlkonig EK43 series grinders. This bearing seat is part of the face plate assembly. NOTE: The old part number is 300949.
SIngle part spout for EK43 and EK43S Grinders. Old part number is 300278.
Shim ring 25x35x0,5 DIN988B (Seeger) for the Mahlkonig EK43 series grinders.
OFF switch (stainless steel, circular) for the newer EK43 series grinders. Push button only, mircoswitch sold separately.
ON switch (stainless steel, circular) for the newer EK43 series grinders. Push button only, mircoswitch sold separately.
EK43 Retaining ring 42 x 1.75
EK 43 - Stop Pin for adjuster dialnotched pin 6 x 16 DIN1470.
Compression spacer (30 x 41 x 0,5) for the Mahlkonig EK43 series grinders.