EK Series Grinder Standard Replacement Burrs for coffee and spices. Compatible with both EK43 and EP43 grinder configurations.
The celebrated performance of the mighty EK43, available in a smaller frame for easier access and flexible counter placement.
- The performance and grinding results of the established EK43 within a smaller space-saving design
- Outstanding particle size spreads feature high extraction rates and the best possible taste
- Premium cast steel grinding discs
- Robust small grinder with high grinding capacity
- Suitable for different applications: filter, espresso, or turkish-fine coffee grinding
- Easy and precise grind adjustment
Remember to use our online support and documentation!
Manuals, How-to Guides and Manuals available for all of our products, so you’re never alone.
K30 Seal ring 70x50x2 (Hopper Gasket), also works for EK43 and E65S grinders.
EK43 Adjustment Cap complete
For threaded adjuster all K30 variants and Peak.
Tension spring for the bag holder arm. (Old #301982)
EK43 Spout Gasket
Adjustment plate (faceplate) securing screw. 2 are required.
EK43 Starting capacitor 550 µF / 150 V UL
This spring is the same for all four springs for Kenia and 710 models. This spring is also for the front two springs for Guatemala vibrating spout.
EK43 Spout screw M5x25
Complete Spout and Bag Holder Assembly.
Grounds residue tray for EK43 series grinder. This grinds tray is tinted.
Supersedes mechanical ¬†type on/off switch #302365. Not interchangeable and you cannot upgrade from mechanical type unless you upgrade electronics....View full details
Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
EK Series Grinder Turkish Replacement Burrs (fine)
The EK43 series grinder shares the same hopper as the K30 espresso grinder.This adapter is needed to adopt to the EK43 grinders.
This is a small parts set for the EK43 & EK43S knocker spout. This includes 4 spout screws, 4 springs and 4 bushings for a complete set.
EK43 Rubber Gasket for EK43 wandering dial
Circuit breaker, 12.0 Amps, 115V 1~ also for EK43S, all Gua & Kenia, VTA single phase)
K30 PEAK Hopper Lid for K30 Series Standard Hopper (3.31 lbs.)
Fits all three positions.
Rotary shaft distance bushing for the Mahlkonig EK43 series grinders. St. 1.4305, 30/18H7 x 18mm.
EK43 Felt ring for grinder housing
Grind adjustment face plate for the Mahlkonig EK43 series grinders in black color. (old part number 306156).
SIngle part spout for EK43 and EK43S Grinders. Old part number is 300278.
EK43 Nut M 4 coated // DIN 1587
Black grind adjustment scale sticker for the Mahlkonig EK43 series. Number scale runs from 0 to 16.