This spring pushes the prebreaker back when you adjust to a courser position. These don't normally fail. Either it is missing from a reassembly or ...
View full details
These bushings are used in collaboration with the screws and springs for the grind chute/spout on the EK43 series grinders. These bushings are sold...
View full details
The EK43 series grinder shares the same hopper as the K30 espresso grinder.This adapter is needed to adopt to the EK43 grinders.
Circuit breaker, 12.0 Amps, 115V 1~ also for EK43S, all Gua & Kenia, VTA single phase)
Black grind adjustment scale sticker for the Mahlkonig EK43 series. Number scale runs from 0 to 16.
EK43 Quick lock for bag holder shaft. Old part number was 301190.
Rotary shaft distance bushing for the Mahlkonig EK43 series grinders. St. 1.4305, 30/18H7 x 18mm.
Grind adjustment face plate for the Mahlkonig EK43 series grinders in black color. (old part number 306156).
Spout lever small parts set for the Mahlkonig EK43 series grinders.
Static strip with spout seal gasket for the Mahlkonig EK43 series grinders.
ON switch (stainless steel, circular) for the newer EK43 series grinders. Push button only, mircoswitch sold separately.
Grind adjustment spindle with fine thread pitch for the Mahlkonig EK43 series grinders. This is part of the face plate assembly.
Pressure ring for the Mahlkonig EK43 series grinders. This is part of the face plate assembly.
Grind chamber housing in aluminum alloy for the Mahlkonig EK43 series grinders. Currently only available in copper and matte white (6/2020). Please...
View full details
Shim ring 25x35x0,5 DIN988B (Seeger) for the Mahlkonig EK43 series grinders.
OFF switch (stainless steel, circular) for the newer EK43 series grinders. Push button only, mircoswitch sold separately.
Ball bearing seat for the Mahlkonig EK43 series grinders. This bearing seat is part of the face plate assembly. NOTE: The old part number is 300949.
EK 43 - Stop Pin for adjuster dialnotched pin 6 x 16 DIN1470.
