Tool to remove the burr sustainer (rotating burr carrier). This tool is necessary to change out the cherry (on/off) switch.
Filter Compatible Products
Filter By Model
VTA 6 S Bushing, steel 41mm right side hold down, long. old # 306612.
Hex nut for the Mahlkonig VTA 6S series.
Mounting plate without electronics for the Mahlkonig VTA 6S 3-phase grinder. Includes the reset switch hole.
Stainless steel bushing for the Mahlkonig VTA series grinders. Shorter in length, old style.
Tension spring anchor pin for the Mahlkonig VTA series grinders.
Driving lever for the Mahlkonig VTA series grinders.
VTA 6 S - Slotted countersunk head screw M6 x 16 // DIN 963
VTA 6 S - Steel ball // Ø 9,5
Contactor for VTA 6S, EK43, and the Kenia/Guatemala series grinders. 208V/60cy, for single and three phaseContactor AF12-30-10-13 (ABB)
VTA 6s Adjustment Lever Complete
Anti-static flapper for outlet spout for the Mahlkonig VTA series grinders. NSF certified.
Clear grounds tray with metal rib mesh for the Mahlkonig VTA 6 S series. NOTE: this part is replacing the old tinted tray (part number 300482).
Grind adjustment ring with foam cover and handle for the Mahlkonig VTA series grinders.
Grind-casing for VTA 6 S10 / USA
Grinder casing complete with grind adjustment assembly for the Mahlkonig VTA series grinders.
VTA 6 S guide ring.
Spout conversion kit to NSF style with bag clamp for the Mahlkonig VTA 6s series.
Plastic cone for adjuster handle for the Mahlkonig VTA 6S series grinders.
VTA 6 S HMVC pressure spring. Heavy duty to use with brass shaker rod.
Stainless steel hopper clamp knob for the Mahlkonig VTA series grinders
VTA 6 S Lever.
Lower casing for Mahlkonig VTA6S HMVC (Custom version for Costco Wholesale).
VTA 6 S On/Off handle, plastic.
Outlet spout tube for the Mahlkonig VTA series grinders. NSF certified.
Rotary burr carrier for the Mahlkonig VTA series. Old part number for this piece is 305706.
VTA 6 S Shaker Rod Washer fits between springs.
VTA 6 S Slotted pan head screw, M6 x 16 coated.
VTA 6 S10 NSF shaker plate with cut out.
120mm Turkish burr set for the Mahlkonig VTA series grinders.
Replacement burrs for the VTA6S 3 Phase. If you wish to purchase replacement burrs for the VTA6S single phase, please click here.
VTA 6S Bag Holder Sealing U-Shaped, foam
VTA 6S Bag Holder Switch Cover, small L-shaped notch, foam
Spout pinches up to this to hold your bag to the spout.
VTA 6S Bag Vibrator Plate
VTA 6S Circuit Breaker, adjust. 9.3 Amp, 208V/60cy/3~ // Ti 16 C 8.0 - 12.0 Amp
VTA 6S Clamp Inside Rubber
Plastic half moon piece that lives on the rear upper grind chamber that presses down on the safety switch button.
VTA 6S Foam around selector handle
VTA 6S Hopper Clamp
VTA 6S Hopper Screw M3 x 8 // DIN 964
VTA 6S Hopper, magnet with holder
Lives in the bag holder assembly.
Spout and sliding plate assembly. Comes with Cherry Switch (on/off switch) (Old# 304043)
VTA 6S Outlet Spout
VTA 6S Pan-Head Screw M4 x 16 // DIN 85 (Old # 301414)
For left side of upper housing clamping assembly.